The short version
- Fine scratches and a hazy, dull look on an acrylic aquarium can be polished out by hand, with an acrylic polishing compound and a cloth.
- My tank took about two hours of polishing.
- Ventilate. The smell of the compound was the hardest part of the job.
- Wash the tank well before you add water or fish.
- Deep scratches are a different job — see “What this method can and cannot do” below.
A scratched-up tank from my university days
I have kept marine fish for years, and like a lot of people in this hobby, I spent plenty of money on equipment and livestock along the way. And when you keep fish for a while, you start wanting a bigger tank. Bigger tanks cost money.
The acrylic tank I had used back at university was still sitting at my parents’ house, so I brought it home.

It was covered in fine scratches. Back in my student days I never cared — I just wanted to fill it with water and get fish in as fast as possible. But looking at it now, it had no clarity at all. It was dull.
I did not have a stand for it yet, either. So I decided: polish it first.
What I used
Two things:
- Acry Sundae (アクリサンデー), a Japanese acrylic polishing compound
- A cloth
That is all. No machine, no special tools.

One note for readers outside Japan: Acry Sundae is sold in Japan. Elsewhere, look for the same category of product — an acrylic or plastic polishing compound, or a scratch-removal kit. The well-known system overseas is the Novus 3-step plastic polish (a cleaner, a fine scratch remover, and a heavy scratch remover). I have not used it myself; it is simply the equivalent kind of product.
The method: just polish

- Put the compound on the tank, and on the cloth. I applied Acry Sundae directly to the tank surface, and to the cloth as well.
- Polish. That is the whole technique. Polish, polish, polish.
- Check as you go. Little by little, the fine scratches became less noticeable. There is a moment where you stop and think, “Hmm, is this actually getting better?” It is. Keep going.
- Keep polishing. Sweating, polishing. In total, the tank took me about two hours. I will be honest: it is tiring work.
- Optional finish. Once the scratches have faded and the clarity is back, you can finish with an acrylic polish product if you like. Optional, not required.
- Skip the bottom if you want. I did not polish the bottom of the tank at all. Nobody ever sees it. Save your arms.
- Wash the tank well. Before water or livestock go in, wash the tank thoroughly. This is important — polishing compound does not belong in a running aquarium.

The result: the tank came back to life. Clear, transparent, like a proper aquarium again. If you get your hands on a used acrylic tank, I recommend trying this before you give up on it.
The real enemy was the smell
Here is the part nobody warns you about. The polishing itself is simple. The hard part was the smell.
Acry Sundae smells strong. Really strong. I had to open every window to get air moving through the room. Then I brought in a fan. And I still felt sick from it once.
My lesson, learned the hard way: do this outside from the start. If you have to work indoors, ventilate seriously — windows open, fan running. The compound smell is the real work in this job.
What this method can and cannot do
Everything above is my tank and my experience. This section is general guidance, so you can judge whether your tank is a candidate.
- Fine scratches and haze: yes. This is exactly what polishing compounds are made for. Fine scratch removers in this category are sold for removing fine scratches, haziness, and abrasions from acrylic and other plastics.
- Deep scratches: probably not with compound alone. A common test: if a scratch catches your fingernail, it is too deep for polishing alone. The usual route for deep scratches is to wet-sand first with progressively finer abrasive paper, then polish. My tank only had fine scratches, so I never needed that step.
- Use the right product. Use a polish made for acrylic or plastic. Ordinary household glass cleaners are the wrong tool — many contain ammonia, which can cloud and craze acrylic.
FAQ
Can I remove scratches from inside a filled tank?
This method is for an empty, dry tank. I polished mine before it was set up, with nothing in it. I have not tried polishing a tank that is already running, and I would not want polishing compound anywhere near the water my fish live in.
How long does it take?
My tank took about two hours, polishing by hand. It depends on the size of the tank and how bad the scratches are, but expect an afternoon’s work, not a ten-minute fix.
Will this work on a glass tank?
No. This is an acrylic method. Acrylic is soft enough that its scratches can be polished out; glass is much harder, and glass scratches generally cannot be removed this way. If your tank is glass, this article will not help you — sorry.
Do I need to polish the bottom?
I did not. Once the tank is set up, nobody sees the bottom. If it bothers you, polish it. If it does not, save the two hours of arm work for the panels people actually look through.
Sources and references
- The original Japanese article (my own experience): “アクリル水槽の傷を直そう!傷を目立たなく!磨き方” — https://www.sakana-kobanzame.com/acrylic-water-tank-polishing/
- NOVUS Plastic Polish, “3-Step System — Plastic & Acrylic Restorer” (Novus #1 Clean & Shine, #2 Fine Scratch Remover, #3 Heavy Scratch Remover; #2 described as eliminating fine scratches, haziness, and abrasions from most plastics) — https://novuspolish.com/pages/3-step-system
- Bulk Reef Supply, “Plastic & Acrylic Polish Kit — Novus Bundle” (the Novus system sold for acrylic aquariums; advice to start with the lightest compound and increase aggressiveness only as needed) — https://www.bulkreefsupply.com/plastic-acrylic-polish-kit-8-oz-novus-bundle.html
- TAP Plastics, “How to Polish and Repair Scratched Plastic” (the fingernail test: a scratch deep enough to catch your fingernail is too deep for the polish method) — http://www.tapplastics.com/product_info/videos/play/how_to_polish_and_repair_scratched_plastic
- imsolidstate, “Acrylic polishing and scratch removal” (a deep-scratch repair done by wet-sanding first, then polishing with the Novus system) — https://www.imsolidstate.com/archives/1324
- Plastic Ranger, “How To Clean An Acrylic Aquarium Without Scratching It” (ammonia-based cleaners such as Windex chemically degrade acrylic, causing crazing and clouding) — https://plasticranger.com/how-to-clean-an-acrylic-aquarium/
- Titan Aquatic Exhibits, “How to Clean Acrylic Aquarium” (avoid vinegar, bleach, ammonia, and alcohol-based cleaners on acrylic) — https://www.titanaquaticexhibits.com/how-to-clean-acrylic-aquarium/


コメント